Carving A Pair Of Cowboy Boots – Part 8 – Finishing Up

As I’ve received several inquiries about where I got and get my Sand-O-Flex wheel and Brass Nameplates, here are the links:
Sand-O-Flex Wheel & Inserts: http://www.meritindustries.com/mstools.htm#slr    I only use the 320 grit inserts.
Brass Plates: http://signsbygwynn.com/brass_plates.htm  I use size A-30 as it’s large enough to be seen but small enough to not dominate the carving.  They have a 3-4 day turnaround and I doubt if you’ll find a better or cheaper product.
-
Yipee!!  All done with this one and time to ride on down the trail to see what’s around the next bend.   Personally, I think this set of videos was a lot better than the one on Shifty.   I haven’t decided on the next project but have received lots of suggestions.  I want to keep the first videos fairly simple and easily accomplished by a beginning carver so things might be a little boring for you advanced whittlers but stick around…..things are sure to pick up. 
-
Anyway, I hope this has been worthwhile for you and that in some way it helped add a little more enjoyment into your carving.   As always your comments are appreciated especially when suggesting ways for me to improve any future projects.

Carving A Pair Of Cowboy Boots – Part 7 – I Get Preachy!

We’re getting down to the nitty-gritty with this video in that we finish up with the carving.  Also, for some reason I go off on the growing use of Vet tape.  But I think it’s a really important point to use the best available protection to keep from ending up in the Emergency Ward with a bad cut.  So if you think I’m going a little overboard on expressing my opinions about the many aspect of carving I’m afraid you’re just going to have to put up with them as I’m much to old to change.

-

Only one more post to go on this project.

Carving A Pair Of Cowboy Boots – Part 6

Carving A Pair Of Cowboy Boots – Part 5

Carving A Pair Of Cowboy Boots – Part 4

Carving A Pair Of Cowboy Boots-Part 3 – Starting at the Bottom!

We finally get around to actually doing some carving!  I’m going to limit these videos to about 10 minutes as the upload time becomes quite long otherwise. 

Carving A Pair Of Cowboy Boots-Part 2-Layout & Cutting The Blanks

With this video we wrap up the base and then, using our boot pattern, we layout the boots on the basswood block and cut them out.

Carving A Pair Of Cowboy Boots – Part 1 – Making The Base-A New Video

For our second video attempt I thought I would keep it pretty simple and redo an old project of a pair of Cowboy Boots. Little projects like this might seem unchallenging to some but they’re an excellent way to hone your skills and we all need to do that occasionally. This project will also show how to make a really nice base that will turn those simple boots into something really special.

-

I’m going to do this in reverse by showing how to make the base first as that’s really the most difficult part of this piece and even that’s pretty easy to do. I will be using some rather large shop tools that some might not have access to but even this hurdle should be easy to get around.

-

So, let’s get started! Here’s the first part:

The Dayton Show 2009

This year's show in Dayton was well attended but they evidently left their wallets at home. Sales were way down for just about everyone. However, the ribbon count, at least for my booth, was pretty good. Here's a rundown of how I fared in competition:

-

The Ranch House Cook- First, Human Caricature

- Second, Best of Caricature Category

Goin' Courtin'- Second, Human Caricature

Johnny Reb- First, Caricature Figure over 15 inches

Black Hawk- First, Caricature Bust

The Horse Soldier- Second, Caricature Bust

No Swimming- Second, Caricature Group

-

Dave Stetson took First Place in the overall Caricature Category as well he should have. His piece of an old couple on a park bench was quite impressive.

-

There were some really fantastic carving in the show as there always are. I apologize for not having more photos. It was great to meet a lot of this Blogs Followers, WCI Forum members and other friends we don't see often enough.

Tex

This is the project I'm taking along to the show in Dayton to hopefully complete but also to use in explaining the various techniques I used in making the videos should someone happen by ande ask a question. I haven't glued anything together yet so it can be taken apart to show how the brim of the hat, it's crown and the head all go together.
-
Everything is packed up and ready for the trip east. Will be taking along a bunch of pieces that I exhibited last year as I haven't been able to carve that much this year. Still, I think I'll have a pretty good exhibt.
-
Special note: I've added a new link on the right to the Vimeo video host site titled ...."Out West Videos". Clicking on this link will give you access to all the videos I've done without having to search through the Blog to find the various posts. A DVD of these videos is in the works but it may be a while before it's available so stay tuned.
-
Anyway, I hope you can make it to the Dayton show cause I know it's going to be a good one. I also hope you like Tex......he's going to be a good one too.
-
Comments always welcome and more photos in the Gallery.