Thursday, September 23, 2010
There are a number of other photos in the Gallery and as always, you comments are welcome.
Now.....what to do next???
With these two videos we come to the end of this project. I hope you enjoyed it and were able to pick up a few new tricks or techniques. The purpose of doing these is to show the complete process from the very beginning to the point of setting the piece on the shelf.
As this series is approximately 5 hours in length I was wondering if any of you were able to get it on one disk?
I’m not really sure what the next project will be but I’ll try and make it interesting. As always your comments are welcome and if you happen to drop a couple coins in that Tip Jar over on the right that would be appreciated too.
Monday, September 20, 2010
I had to break this part of the painting process into two parts due to the length of the videos. I know a lot of you are interested in my painting techniques so I wanted to get in as much of it as possible.
I’m really satisfied with Gabby so far. I think he’s going to be a real winner. As always your comments are welcome.
Special Note: I received an email asking which is the best way to download and copy these videos from the Blog. If any of you have done this you might make a comment about how to do it. Thanks.
Sunday, September 19, 2010
There are more photos in the Gallery and your comments are appreciated as always.
Thursday, September 16, 2010
With these two video segments we finally finished up the carving portion of this series. A couple of you ask how to save the first hat blank being as you already cut it out so I offer a couple of examples…one that didn’t work for me and another that did. Up next is the painting which will hopefully go pretty quick.
Special note: Some of you have asked where I get my name plates now that I lost my earlier source. Well here’s the link to the company in New York: www.halexawards.com. The plate number is not on their site yet however they said it would be in a couple of weeks. If you need one before then ask for item number 0994A.
As always, your comments are welcome and appreciated.
Tuesday, September 14, 2010
Proving that I still have a few grey cells up there working, I came up with this idea of carving the hat brim that is a easier than doing it the normal way. It sure saved some time and effort. One thing though….if you try it make sure you drill the large hole on the larger block of wood as I did as you just can’t hold a smaller one, especially one where you’ve already sawn the hat blank. Those large bits will just jerk it right out of your hand. Dangerous! One more thing….that piece of masking tape around the bit shank is to let me know when I’ve reached the correct depth on the brim. Don’t want to drill completely through!
In the next post we’ll finish up the carving and head over to the paint table. Almost there!!!
Wednesday, September 08, 2010
The Grandkids have returned to Bahrain so it’s back to the videos. With this part we layout the hat on the block and cut the blank.